Asbestos Containing Materials Removal Safe Work Method Statement

Asbestos Containing Materials Removal Safe Work Method Statement (SWMS Template) delivered in Microsoft Word format for easy editing.

Asbestos Containing Materials Removal Safe Work Method Statement

Asbestos Containing Materials Removal Safe Work Method Statement (SWMS)

Whether you need to get on site to start work, looking to create a safe work environment or pitching for that next government tender -the Air Powered Tools Safe Work Method Statement is easy to customise, easy to use and easy to integrate into your current Safety Management System. If you don't have a Safety Management System, we need to talk, seriously, you don't need to be carrying that level of risk exposure in your business - we can help.

Look, we understand that business should be rewarding and not consumed by tedious red tape. The Safe Work Method Statement Template we create is in an easy to understand format, while at the same time being some of the highest quality documents in the industry. Our SWMS documents get you onsite, save you loads of time and are very user-friendly. This way, you can get on with doing what you do best.

The Asbestos Containing Materials Removal Safe Work Method Statement (SWMS) covers the following Job Steps, including potential hazards, control measures and risk ratings:

  1. Planning and preparation
  2. Training and capabilities
  3. Assess onsite conditions
  4. Set up work area
  5. Temporary Traffic Control (TMP)
  6. Delivery of materials and equipment
  7. Identification of asbestos containing material, gathering of samples for analysis
  8. Preparation of work areas
  9. Air monitoring
  10. PPE & respiratory equipment
  11. Establishment of boundaries
  12. Emergency exit plan
  13. Removal work
  14. Establish adequate essential services prior to start of works
  15. Removal of ACM sheeting
  16. Decontamination
  17. Client inspection
  18. Waste disposal
  19. On completion

The Asbestos Containing Materials Removal Safe Work Method Statement Includes


Risk Assessment Matrix | Hierarchy of Controls | PPE | Emergency Response

Your Asbestos Containing Materials Removal Safe Work Method Statement is ready to be used in three easy steps:

  1. Add your company logo and company details to the document.
  2. Assess any on-site risks.
  3. Address any site specific risks and add them to your SWMS Template.

Now that your Safe Work Method Statement (SWMS) is ready for use, you can also make the SWMS document available as a training resource for activities such as WHS-OHS Toolbox Meeting Talks or Workplace Inductions.

Bluesafe Quick Tips:

  1. There are many legal requirements assoicated with Asbestos removal, make sure you are aware before removing asbestos containing material.
  2. You must use signs and barricades to indicate where the removal work will be conducted.
  3. You must wear proper mandated and effective PPE.

Asbestos Containing Materials Removal Safe Work Method Statement

  • Detailed and pre-filled Asbestos Containing Materials Removal Safe Work Method Statement.
  • Immediate Download Delivery.
    Fully editable Safe Work Method Statement Template.
  • Easy to customise - instructions included.
  • Referenced to AS/NZS (Standards) and Legislation. 
Need to edit your
Asbestos Containing Materials Removal Safe Work Method Statement
$ 96.80 AUD
$ 96.80 AUD
Buy now

5 SWMS Pack

$86.50 each
$ 432.50 AUD
$ 432.50 AUD
Buy now

10 SWMS Pack

$76.50 each
$ 765.00 AUD
$ 765.00 AUD
Buy now

20 SWMS Pack

$65.50ea
$ 1,310.00 AUD
$ 1,310.00 AUD
Buy now

50 SWMS Pack

$45.50 each
$ 2,275.00 AUD
$ 2,275.00 AUD
Buy now

View a Safe Work Method Statement Example

See an example of a Safe Work Method Statement Template below. All our SWMS Template documents are comprehensive in nature, easy to use, and are a huge time saver. Our Safe Work Method Statement Templates are quick and easy to customise to your specific business or operation and are perfectly suited for every day use, for larger contracts and tenders right through to qualifying for contractor management platforms such as CM3.

What is a Safe Work Method Statement?

A SWMS is a document that outlines the high-risk construction work activities that will be performed at a workplace, the hazards that will be present as a result of these activities, and the controls that will be implemented to mitigate the risks.

A single SWMS can be utilised for numerous high-risk construction work activities, such as employing powered mobile plant, working at heights of more than 2 metres, and working near to a road that is used by traffic other than pedestrians.

A SWMS is an administrative control that is used to support higher-order controls, such as engineering controls, that are designed to remove or reduce hazards to health and safety.

A SWMS differs from other documentation such as a Job Safety Analysis or a Safe Operating Procedure in that it focuses on specific jobs or processes. A SWMS isn't meant to be a procedure; rather, it's a tool for supervisors and workers to check and monitor the workplace control measures. For high-risk work activities, a PCBU (Person Conducting a Business or Undertaking)  must prepare a Safe Work Method Statement (SWMS) or check that one has been prepared before starting work. It is important to note that before any work process has started, a SWMS must be prepared.

A PCBU, on the other hand, also must manage health and safety hazards by eliminating or reducing them as much as possible. Before beginning any work on a project, the principal contractor must also obtain a copy of the SWMS.

What information does a Safe Work Method Statement need to contain?

A Safe Work Method Statement should identify high-risk work and any specify hazards related to high-risk construction work as well as any health and safety risks. The SWMS should describe the risk-control measures to be implemented, monitored, and reviewed and also should describe how the risk-control measures will be effective at reducing or eliminating the risk, and how they will be implemented, monitored, and reviewed.

A Safe Work Method Statement should be concise and focus on outlining the specific risks identified for the high-risk work to be performed, as well as the control measures to be implemented to ensure that the work is completed safely.

A long and overly complex Safe Work Method Statement which could be difficult to comprehend, implement and monitor or review may be confusing for workers to mentally digest and therefore is not ideal in helping to reduce or eliminate risks in the workplace. It is imperative that workers, and especially those who do not speak English, are able to understand the Safe Work Method Statement. Consider having pictures or diagrams added to the SWMS as a more effective way of presenting information contained within the SWMS.

The SWMS should also contain other regulatory requirements to protect health and safety of all personnel, such as controlling noise exposure and manual job risks. Also, keep in mind that evidence of a completed risk assessment may be required by the regulator or for auditing reasons if the Safe Work Method Statement is based on a workplace-specific risk assessment.

Who's Responsible for creating the Safe Work Method Statement?

In collaboration with workers who will be directly engaged in the activity, the person responsible for carrying out the work is usually best equipped to prepare the SWMS document. In most cases, this means that a Safe Work Method Statement is created by the builder for his or her employees, or by the subcontractor for their employees.

To establish who is in the best position to prepare the Safe Work Method Statement, the principle contractor, builder, and/or subcontractors should decide who will take responsibility for the SWMS.

It's also a requirement that all managers, contractors, supervisors, and workers be involved in the creation of a Safe Work Method Statement. Workers must be consulted so that they understand the SWMS in depth and what they must do to establish and maintain risks and implement control measures to manage the risk. Sharing information and utilising workers' knowledge and experience may also aid in ensuring that the task is completed in accordance with the SWMS.

If your workplace has a Health and Safety Representative, they should also be contacted while creating a Safe Work Method Statement.

What does the principal contractor's responsibility entail?

Before beginning work, a principal contractor must take all reasonable steps to obtain a SWMS from any contractor performing high-risk work. If no SWMS exists, the principal contractor must arrange for one to be created, for example by the contractor or subcontractor.

A general contractor should establish plans to ensure that high-risk work is carried out safely and in compliance with the Safe Work Method Statement. This can be done by keeping an eye on how the SWMS is being implemented on the ground.

The principal contractors' WHS management plan must also include detailed arrangements for collecting, assessing, monitoring, and reviewing the SWMS, according to the WHS Regulations.

How to Write a Safe Work Method Statement

If you're looking to write your own Asbestos Containing Materials Removal Safe Work Method Statement, the first step is to create the document as a Safe Work Method Statement Template. This way, you can use the same SWMS Template and then adjust the document for each different asbestos containing materials removal project as needed, making sure that your Asbestos Containing Materials Removal SWMS Template addresses any site specific risks.

The fastest and most cost effective solution would be to purchase a Bluesafe Asbestos Containing Materials Removal SWMS Template. However, if you decide to take the route of writing your own asbestos containing materials removal SWMS.

There are some fundamental requirements and information which you may want to consider adding to your Asbestos Containing Materials Removal SWMS such as:

  • Details of the person(s) responsible for making sure implementation, monitoring and compliance of the Asbestos Containing Materials Removal SWMS as well as any reviews and modifications.
  • Any information detailing safety meetings or toolbox talks in relation to asbestos containing materials removal work, scheduled in accordance with legislative requirements to first identify any site hazards where the asbestos containing materials removal work is being conducted, secondly, communicate the risks and hazards and then take steps to eliminate or control each hazard in relation to the asbestos containing materials removal work being done. 
  • Any changes added to the Asbestos Containing Materials Removal SWMS after an incident or a near miss. 

Note: The Asbestos Containing Materials Removal SWMS must be kept and be available for inspection at least until the asbestos containing materials removal work is completed. Where the Asbestos Containing Materials Removal SWMS is revised, all versions of the SWMS Template should be kept. If a notifiable incident occurs in relation to the Asbestos Containing Materials Removal Safe Work Method Statement, the Asbestos Containing Materials Removal SWMS must be kept for a minimum of two years from the date of the incident.

Your Asbestos Containing Materials Removal Safe Work Method Statement Template should list any high risk construction work, such as: 

  • Does the asbestos containing materials removal work outlined in the Asbestos Containing Materials Removal SWMS involve a risk of a person falling more than 2 meters?
  • Is the asbestos containing materials removal work outlined in the Asbestos Containing Materials Removal SWMS carried out on or near pressurised gas mains or piping?
  • Is the asbestos containing materials removal work outlined in the Asbestos Containing Materials Removal SWMS carried out on a telecommunication tower?
  • Is the asbestos containing materials removal work outlined in the Asbestos Containing Materials Removal SWMS carried out on or near chemical, fuel or refrigerant lines?
  • Does the asbestos containing materials removal work outlined in the Asbestos Containing Materials Removal SWMS involve demolition of an element of a structure that is load-bearing?
  • Is the asbestos containing materials removal work outlined in the Asbestos Containing Materials Removal SWMS carried out on or near energised electrical installations or services?
  • Does the asbestos containing materials removal work outlined in the Asbestos Containing Materials Removal SWMS involve demolition of an element related to the physical integrity of a structure?
  • Is the asbestos containing materials removal work outlined in the Asbestos Containing Materials Removal SWMS carried out in an area that may have a contaminated or flammable atmosphere?
  • Does the asbestos containing materials removal work outlined in the Asbestos Containing Materials Removal SWMS involve, or is likely to involve, disturbing asbestos?
  • Does the asbestos containing materials removal work outlined in the Asbestos Containing Materials Removal SWMS involve tilt-up or precast concrete?
  • Does the asbestos containing materials removal work outlined in the Asbestos Containing Materials Removal SWMS involve structural alteration or repair that requires temporary support to prevent collapse?
  • Is the asbestos containing materials removal work outlined in the Asbestos Containing Materials Removal SWMS carried out on, in or adjacent to a road, railway, shipping lane or other traffic corridor?
  • Is the asbestos containing materials removal work outlined in the Asbestos Containing Materials Removal SWMS carried out in or near a confined space?
  • Is the asbestos containing materials removal work outlined in the Asbestos Containing Materials Removal SWMS carried out in an area of a workplace where there is any movement of powered mobile plant?
  • Is the asbestos containing materials removal work outlined in the Asbestos Containing Materials Removal SWMS carried out in/near a shaft or trench deeper than 1.5m or tunnel involving use of explosives?
  • Is the asbestos containing materials removal work outlined in the Asbestos Containing Materials Removal SWMS carried out in areas with artificial extremes of temperature?
  • Is the asbestos containing materials removal work outlined in the Asbestos Containing Materials Removal SWMS carried out in or near water or other liquid that involves a risk of drowning?
  • Does the asbestos containing materials removal work outlined in the Asbestos Containing Materials Removal SWMS involve diving work? 

Your Asbestos Containing Materials Removal Safe Work Method Statement should also identify any high-risk machinery or equipment in operation near the work site, such as:

  • Forklift
  • Crane
  • Hoist
  • Asbestos Containing Materials Removal
  • Backhoe
  • Loader
  • Boom Lift
  • Elevated Work Platform (EWP)
  • Genie Lift
  • Trencher
  • Drilling Rig
  • Trucks
  • Formwork
  • Bobcat
  • Flammable Gas
  • Fuel
  • Dozer
  • High Voltage
  • Mulcher
  • Tilt-up Panels
  • Roller
  • Scissor Lift
  • Tractor 

Your Asbestos Containing Materials Removal SWMS should also list any Personal Protective Equipment such as: 

  • Foot Protection - Boots or closed in shoes
  • Hand Protectiglazinon - Gloves
  • Head Protection - Hard hat or helmet
  • Hearing Protection - Ear plugs or ear muffs
  • Eye Protection - Safety glasses, goggles or face shields
  • Respiratory Protection - Face masks etc
  • Face Protection - Face shield, welding mask etc
  • High Visual Clothing
  • Protective Clothing - Overalls etc
  • Fall Protection - Safety harness, edge protection etc
  • Sun Protection - Sunscreen, hat etc
  • Hair and Jewellery Secured - Hair Net, etc 

The Asbestos Containing Materials Removal SWMS must be reviewed continually to ensure it remains effective and relevant. The Asbestos Containing Materials Removal SWMS must be reviewed (and revised if necessary)if relevant control measures in relation to asbestos containing materials removal work are revised. The review process should be carried out in consultation with workers (including contractors and subcontractors) who may be affected by the Asbestos Containing Materials Removal and their health and safety representatives who represented that work group at the workplace.

When the Asbestos Containing Materials Removal SWMS has been revised, the person conducting a business or undertaking must ensure:  

  1. All persons involved in the asbestos containing materials removal work are advised that a revision has been made and how they can access the revised Asbestos Containing Materials Removal SWMS;
  2. Persons who will need to change a work procedure or system as a result of the review are advised of the changes in a way that will enable them to implement their duties consistently with the revised Asbestos Containing Materials Removal SWMS; and,
  3. Workers that will be involved in the asbestos containing materials removal work are provided with the relevant information and instruction that will assist them to understand and implement the revised Asbestos Containing Materials Removal SWMS. 

When preparing your Asbestos Containing Materials Removal SWMS, here are some topics you might want to also include to ensure you have covered as many risks and hazards as possible.  

Planning and Preparation When Working With and Around  Asbestos Containing Materials Removal.

When writing your Asbestos Containing Materials Removal SWMS, establish any policies, procedures and systems for working with Asbestos Containing Materials Removals in consultation with the Principal Contractor and workers while being sure to establish:

  • Health and Safety guidelines for asbestos containing materials removal work
  • Emergency plans and evacuation procedures for the Asbestos Containing Materials Removal SWMS
  • Worker inductions for Asbestos Containing Materials Removal
  • Toolbox talks (safety meetings) added to the Asbestos Containing Materials Removal SWMS
  • Outline details of supervision of the site and workers on the Asbestos Containing Materials Removal SWMS
  • Check all workers qualifications, permits and competencies for Asbestos Containing Materials Removal operations
  • Ensure the Asbestos Containing Materials Removal and any related equipment is functioning correctly
  • Hazard reporting procedures in place and added to the Asbestos Containing Materials Removal SWMS
  • Incident reporting procedures in place and added to the Asbestos Containing Materials Removal SWMS
  • Exclusion zones when conducting asbestos containing materials removal work
  • Risk Assessment for TASK completed and noted on the Asbestos Containing Materials Removal SWMS
  • Electrical NO GO ZONES identified, discussed and documented.

Assessment of Site Conditions

Thoroughly assess the work site/area conditions when doing asbestos containing materials removal and ensure that: 

  1. A risk assessment of the asbestos containing materials removal work is conducted
  2. Suitable access and adequate space to conduct asbestos containing materials removal work safely
  3. Consult with all stakeholders on potential hazards and risks when conducting asbestos containing materials removal work
  4. Consultation with all relevant workers and personnel for Asbestos Containing Materials Removal SWMS details
  5. If conducting Asbestos Containing Materials Removal at night, ensure there is adequate lighting
  6. Check that the work environment is suitable for asbestos containing materials removal work

Asbestos ContainingMaterials Removal Training - Worker Qualifications

Ensure all workers have the appropriate licenses in conducting  Asbestos Containing Materials Removal as well as any qualifications that may be required for various asbestos containing materials removal projects before starting work. If White Cards are required, retain copies of all cards, licenses and qualifications of personnel.

All personnel must:

  1. Be trained and/or have received instructions on the Asbestos Containing Materials Removal SWMS including all safety and emergency procedures.
  2. Be qualified, knowledgeable and competent in Asbestos Containing Materials Removal operations and asbestos containing materials removal work as well as all delegated tasks/responsibilities
  3. Be fully aware and understand the scope of work in relation to the Asbestos Containing Materials Removal SWMS 

Below are some examples of some Control Measures to be implemented when creating your own Asbestos Containing Materials Removal Safe Work Method Statement Template: 

  • Use P2 Rated mask.
  • Spray bottle or applicator for PVA.
  • Wet-wipe, clean tools and exposed skin upon completion.
  • Wear gloves for protection.
  • Use scaffolding or platform ladders.
  • Spray unsealed/exposed asbestos with PVA.
  • Let a competent person assess area specific conditions and record in Tool box meeting with workers.
  • Air monitoring set up by ASA and analysed by
  • Use correctly rated equipment for required task.
  • Check for proper damage and correct operation.
  • Always use disposable coveralls for all removal works.
  • Use min P2 rated masks at all times and higher rating as required by task refer COP if unsure.
  • Preferably, use steel cap work boots without laces. For no other options, tape over laces.
  • Wear gloves and safety glasses.
  • Erect asbestos removal signage at the entrances and exits of barricaded work area.
  • Erect further signs/barricades as required and as determined in Toolbox meetings.
  • Make sure adequate signage and barricades are used at all access and egress points.
  • Ensure all onsite workers are aware of removal works.
  • Refer to decontamination SWMS and removal control plan.
  • Discuss and record site specific plan at toolbox meeting.
  • Refer supporting decontamination procedures and toolbox meetings.
  • Allow regular breaks for daily conditions as determined in toolbox meeting.
  • Do not start work until checks have been made and services are determined to be adequate.
  • Make sure area is isolated and secure.
  • Make sure essential services have been established.
  • Locate the transport vehicle as close to the work area as possible.
  • Make sure all workers are wearing correct PPE.
  • Remove sheets minimising any breakages.
  • Seal exposed edges of cracked sheets with spray.
  • After completing removal, wrap up protective sheets and dispose with contaminated waste.
  • Use approved HEPA vac to vacuum the work area.
  • Spray any remaining frame work with Particle binder solution.
  • Wear appropriate PPE at all times.
  • Follow procedures as per COP requirements.
  • Provide suitable mask for inspection.
  • Inspect pod thoroughly that it is properly wrapped and sealed prior to transport.
  • Refer SWMS truck driving.
  • Use EPA registered vehicle and follow ERA 57 requirements for asbestos transportation.

National: View the Model Codes of Practice for Excavation Work on Safe Work Australia's website here.
Victoria: Victoria's Code of Practice for Excavation Work may be viewed on Work Safe Victoria's website here.