Electrical – Isolate Lockout Test And Tag Safe Work Method Statement

Electrical – Isolate Lockout Test And Tag Safe Work Method Statement (SWMS Template) delivered in Microsoft Word format for easy editing.

Electrical – Isolate Lockout Test And Tag Safe Work Method Statement

Electrical – Isolate Lockout Test And Tag Safe Work Method Statement (SWMS)

Whether you need to get on site to start work, looking to create a safe work environment or pitching for that next government tender - the Electrical (Isolate Lockout) Safe Work Method Statement is easy to customise, easy to use and easy to integrate into your current Safety Management System. If you don't have a Safety Management System, we need to talk, seriously, you don't need to be carrying that level of risk exposure in your business - we can help.

Look, we understand that business should be rewarding and not consumed by tedious red tape. The Safe Work Method Statement Template we create is in an easy to understand format, while at the same time being some of the highest quality documents in the industry. Our SWMS documents get you onsite, save you loads of time and are very user-friendly. This way, you can get on with doing what you do best.

The Electrical – Isolate Lockout Test And Tag Safe Work Method Statement (SWMS) covers the following Job Steps, including potential hazards, control measures and risk ratings:

  1. Planning and preparation
  2. Training and capabilities
  3. Assess onsite conditions
  4. Set up work area
  5. Temporary Traffic Control (TMP)
  6. Delivery of materials and equipment
  7. Risk Assessment
  8. Site induction
  9. Personal Protection Equipment(PPE)
  10. Housekeeping -  moving on stairs, uneven, steep and slippery surfaces
  11. Inspect electrical test equipment
  12. Plan the work and work area
  13. Isolate all power sources
  14. Fit danger tags to isolation devices
  15. Test work for safe isolation
  16. Undertake required works and make safe prior to energising
  17. Energise and commission
  18. Installation of signs and labels
  19. Completion of work or end of workday
  20. On completion

The Electrical – Isolate Lockout Test And Tag Safe Work Method Statement Includes


Risk Assessment Matrix | Hierarchy of Controls | PPE | Emergency Response

Your Electrical – Isolate Lockout Test And Tag Safe Work Method Statement is ready to be used in three easy steps:

  1. Add your company logo and details to the SWMS Template.
  2. Identify site specific risks.
  3. Address any site specific risks and add them to your SWMS Template.

Your SWMS is now read to use, and may also be used as training materials for work related activities such as Workplace Inductions or WHS-OHS Toolbox Meeting Talks.

Bluesafe Quick Tips:

  1. Find the procedure to be used.
  2. Release any stored energy (steam, hydraulic, etc.)
  3. The lockout tag out procedure you are using should list all energy sources that need isolating.

Electrical – Isolate Lockout Test And Tag Safe Work Method Statement

  • High quality and ready to use Electrical – Isolate Lockout Test And Tag Safe Work Method Statement.
  • Instant Delivery.
  • Fully editable Safe Work Method Statement Template.
  • Easy to customise - instructions included.
  • Referenced to AS/NZS (Standards) and Legislation. 
Need to edit your
Electrical – Isolate Lockout Test And Tag Safe Work Method Statement
$ 96.80 AUD
$ 96.80 AUD
Buy now

5 SWMS Pack

$86.50 each
$ 432.50 AUD
$ 432.50 AUD
Buy now

10 SWMS Pack

$76.50 each
$ 765.00 AUD
$ 765.00 AUD
Buy now

20 SWMS Pack

$65.50ea
$ 1,310.00 AUD
$ 1,310.00 AUD
Buy now

50 SWMS Pack

$55.50 each
$ 2,275.00 AUD
$ 2,275.00 AUD
Buy now

View a Safe Work Method Statement Example

See an example of a Safe Work Method Statement Template below. All our SWMS Template documents are comprehensive in nature, easy to use, and are a huge time saver. Our Safe Work Method Statement Templates are quick and easy to customise to your specific business or operation and are perfectly suited for every day use, for larger contracts and tenders right through to qualifying for contractor management platforms such as CM3.

What is a Safe Work Method Statement?

A SWMS is a document that outlines the high-risk construction work activities that will be performed at a workplace, the hazards that will be present as a result of these activities, and the controls that will be implemented to mitigate the risks.

A single SWMS can be utilised for numerous high-risk construction work activities, such as employing powered mobile plant, working at heights of more than 2 metres, and working near to a road that is used by traffic other than pedestrians.

A SWMS is an administrative control that is used to support higher-order controls, such as engineering controls, that are designed to remove or reduce hazards to health and safety.

A SWMS differs from other documentation such as a Job Safety Analysis or a Safe Operating Procedure in that it focuses on specific jobs or processes. A SWMS isn't meant to be a procedure; rather, it's a tool for supervisors and workers to check and monitor the workplace control measures. For high-risk work activities, a PCBU (Person Conducting a Business or Undertaking)  must prepare a Safe Work Method Statement (SWMS) or check that one has been prepared before starting work. It is important to note that before any work process has started, a SWMS must be prepared.

A PCBU, on the other hand, also must manage health and safety hazards by eliminating or reducing them as much as possible. Before beginning any work on a project, the principal contractor must also obtain a copy of the SWMS.

What information does a Safe Work Method Statement need to contain?

A Safe Work Method Statement should identify high-risk work and any specify hazards related to high-risk construction work as well as any health and safety risks. The SWMS should describe the risk-control measures to be implemented, monitored, and reviewed and also should describe how the risk-control measures will be effective at reducing or eliminating the risk, and how they will be implemented, monitored, and reviewed.

A Safe Work Method Statement should be concise and focus on outlining the specific risks identified for the high-risk work to be performed, as well as the control measures to be implemented to ensure that the work is completed safely.

A long and overly complex Safe Work Method Statement which could be difficult to comprehend, implement and monitor or review may be confusing for workers to mentally digest and therefore is not ideal in helping to reduce or eliminate risks in the workplace. It is imperative that workers, and especially those who do not speak English, are able to understand the Safe Work Method Statement. Consider having pictures or diagrams added to the SWMS as a more effective way of presenting information contained within the SWMS.

The SWMS should also contain other regulatory requirements to protect health and safety of all personnel, such as controlling noise exposure and manual job risks. Also, keep in mind that evidence of a completed risk assessment may be required by the regulator or for auditing reasons if the Safe Work Method Statement is based on a workplace-specific risk assessment.

Who's Responsible for creating the Safe Work Method Statement?

In collaboration with workers who will be directly engaged in the activity, the person responsible for carrying out the work is usually best equipped to prepare the SWMS document. In most cases, this means that a Safe Work Method Statement is created by the builder for his or her employees, or by the subcontractor for their employees.

To establish who is in the best position to prepare the Safe Work Method Statement, the principle contractor, builder, and/or subcontractors should decide who will take responsibility for the SWMS.

It's also a requirement that all managers, contractors, supervisors, and workers be involved in the creation of a Safe Work Method Statement. Workers must be consulted so that they understand the SWMS in depth and what they must do to establish and maintain risks and implement control measures to manage the risk. Sharing information and utilising workers' knowledge and experience may also aid in ensuring that the task is completed in accordance with the SWMS.

If your workplace has a Health and Safety Representative, they should also be contacted while creating a Safe Work Method Statement.

What does the principal contractor's responsibility entail?

Before beginning work, a principal contractor must take all reasonable steps to obtain a SWMS from any contractor performing high-risk work. If no SWMS exists, the principal contractor must arrange for one to be created, for example by the contractor or subcontractor.

A general contractor should establish plans to ensure that high-risk work is carried out safely and in compliance with the Safe Work Method Statement. This can be done by keeping an eye on how the SWMS is being implemented on the ground.

The principal contractors' WHS management plan must also include detailed arrangements for collecting, assessing, monitoring, and reviewing the SWMS, according to the WHS Regulations.

How to Write a Safe Work Method Statement 

If you're looking to write your own Electrical – Isolate Lockout Test And Tag Safe Work Method Statement, the first step is to create the document as a Safe Work Method Statement Template. This way, you can use the same SWMS Template and then adjust the document for each different electrical – isolate lockout test and tag project as needed, making sure that your Electrical – Isolate Lockout Test And Tag SWMS Template addresses any site specific risks.

The fastest and most cost effective solution would be to purchase a Bluesafe Electrical – Isolate Lockout Test And Tag SWMS Template. However, if you decide to take the route of writing your own electrical – isolate lockout test and tag SWMS.

There are some fundamental requirements and information which you may want to consider adding to your Electrical – Isolate Lockout Test And Tag SWMS such as: 

  • Details of the person(s) responsible for making sure implementation, monitoring and compliance of the Electrical – Isolate Lockout Test And Tag SWMS as well as any reviews and modifications. 
  • Any information detailing safety meetings or toolbox talks in relation to electrical – isolate lockout test and tag work, scheduled in accordance with legislative requirements to first identify any site hazards where the electrical – isolate lockout test and tag work is being conducted, secondly, communicate the risks and hazards and then take steps to eliminate or control each hazard in relation to the electrical – isolate lockout test and tag work being done. 
  • Any changes added to the Electrical – Isolate Lockout Test And Tag SWMS after an incident or a near miss.

Note: The Electrical – Isolate Lockout Test And Tag SWMS must be kept and be available for inspection at least until the electrical – isolate lockout test and tag work is completed. Where the Electrical – IsolateLockout Test And Tag SWMS is revised, all versions of the SWMS Template should be kept. If a notifiable incident occurs in relation to the Electrical – Isolate Lockout Test And Tag Safe Work Method Statement, the Electrical – Isolate Lockout Test And Tag SWMS must be kept for a minimum of two years from the date of the incident. 

Your Electrical – Isolate Lockout Test And Tag Safe Work Method Statement Template should list any high risk construction work, such as: 

  • Does the electrical – isolate lockout test and tag work outlined in the Electrical – Isolate Lockout Test And Tag SWMS involve a risk of a person falling more than 2 meters?
  • Is the electrical – isolate lockout test and tag work outlined in the Electrical – Isolate Lockout Test And Tag SWMS carried out on or near pressurised gas mains or piping?
  • Is the electrical – isolate lockout test and tag work outlined in the Electrical – Isolate Lockout Test And Tag SWMS carried out on a telecommunication tower?
  • Is the electrical – isolate lockout test and tag work outlined in the Electrical – Isolate Lockout Test And Tag SWMS carried out on or near chemical, fuel or refrigerant lines?
  • Does the electrical – isolate lockout test and tag work outlined in the Electrical – Isolate Lockout Test And Tag SWMS involve demolition of an element of a structure that is load-bearing?
  • Is the electrical – isolate lockout test and tag work outlined in the Electrical – Isolate Lockout Test And Tag SWMS carried out on or near energised electrical installations or services?
  • Does the electrical – isolate lockout test and tag work outlined in the Electrical – Isolate Lockout Test And Tag SWMS involve demolition of an element related to the physical integrity of a structure?
  • Is the electrical – isolate lockout test and tag work outlined in the Electrical – Isolate Lockout Test And Tag SWMS carried out in an area that may have a contaminated or flammable atmosphere?
  • Does the electrical – isolate lockout test and tag work outlined in the Electrical – Isolate Lockout Test And Tag SWMS involve, or is likely to involve, disturbing asbestos?
  • Does the electrical – isolate lockout test and tag work outlined in the Electrical – Isolate Lockout Test And Tag SWMS involve tilt-up or precast concrete?
  • Does the electrical – isolate lockout test and tag work outlined in the Electrical – Isolate Lockout Test And Tag SWMS involve structural alteration or repair that requires temporary support to prevent collapse?
  • Is the electrical – isolate lockout test and tag work outlined in the Electrical – Isolate Lockout Test And Tag SWMS carried out on, in or adjacent to a road, railway, shipping lane or other traffic corridor?
  • Is the electrical – isolate lockout test and tag work outlined in the Electrical – Isolate Lockout Test And Tag SWMS carried out in or near a confined space?
  • Is the electrical – isolate lockout test and tag work outlined in the Electrical – Isolate Lockout Test And Tag SWMS carried out in an area of a workplace where there is any movement of powered mobile plant?
  • Is the electrical – isolate lockout test and tag work outlined in the Electrical – Isolate Lockout Test And Tag SWMS carried out in/near a shaft or trench deeper than 1.5m or tunnel involving use of explosives?
  • Is the electrical – isolate lockout test and tag work outlined in the Electrical – Isolate Lockout Test And Tag SWMS carried out in areas with artificial extremes of temperature?
  • Is the electrical – isolate lockout test and tag work outlined in the Electrical – Isolate Lockout Test And Tag SWMS carried out in or near water or other liquid that involves a risk of drowning?
  • Does the electrical – isolate lockout test and tag work outlined in the Electrical – Isolate Lockout Test And Tag SWMS involve diving work? 

Your Electrical – Isolate Lockout Test And Tag Safe Work Method Statement should also identify any high-risk machinery or equipment in operation near the work site, such as:

Your Electrical – Isolate Lockout Test And Tag SWMS should also list any Personal Protective Equipment such as:

  • Foot Protection - Boots or closed in shoes
  • Hand Protection - Gloves
  • Head Protection - Hard hat or helmet
  • Hearing Protection - Ear plugs or ear muffs
  • Eye Protection - Safety glasses, goggles or face shields
  • Respiratory Protection - Face masks etc
  • Face Protection - Face shield, welding mask etc
  • High Visual Clothing
  • Protective Clothing - Overalls etc
  • Fall Protection - Safety harness, edge protection etc
  • Sun Protection - Sunscreen, hat etc
  • Hair and Jewellery Secured - Hair Net, etc 

The Electrical – Isolate Lockout Test And Tag SWMS must be reviewed continually to ensure it remains effective and relevant. The Electrical – Isolate Lockout Test And Tag SWMS must be reviewed (and revised if necessary)if relevant control measures in relation to electrical – isolate lockout test and tag work are revised. The review process should be carried out in consultation with workers (including contractors and subcontractors) who may be affected by the Electrical – Isolate Lockout Test And Tag and their health and safety representatives who represented that work group at the workplace.

When the Electrical – Isolate Lockout Test And Tag SWMS has been revised, the person conducting a business or undertaking must ensure:  

  1. All persons involved in the electrical – isolate lockout test and tag work are advised that a revision has been made and how they can access the revised Electrical – Isolate Lockout Test And Tag SWMS;
  2. Persons who will need to change a work procedure or system as a result of the review are advised of the changes in a way that will enable them to implement their duties consistently with the revised Electrical – Isolate Lockout Test And Tag SWMS; and,
  3. Workers that will be involved in the electrical – isolate lockout test and tag work are provided with the relevant information and instruction that will assist them to understand and implement the revised Electrical– Isolate Lockout Test And Tag SWMS.

When preparing your Electrical – Isolate Lockout Test And Tag SWMS, here are some topics you might want to also include to ensure you have covered as many risks and hazards as possible.  

Planning and Preparation When Working With and Around Electrical – Isolate Lockout Test And Tag. 

When writing your Electrical – Isolate Lockout Test And Tag SWMS, establish any policies, procedures and systems for working with Electrical – Isolate Lockout Test And Tag in consultation with the Principal Contractor and workers while being sure to establish: 

  • Health and Safety guidelines for electrical – isolate lockout test and tag work
  • Emergency plans and evacuation procedures for the Electrical– Isolate Lockout Test And Tag SWMS
  • Worker inductions for Electrical – Isolate Lockout Test And Tag
  • Toolbox talks (safety meetings) added to the Electrical – Isolate Lockout Test And Tag SWMS
  • Outline details of supervision of the site and workers on the Electrical – Isolate Lockout Test And Tag SWMS
  • Check all workers qualifications, permits and competencies for Electrical – Isolate Lockout Test And Tag operations
  • Ensure the Electrical – Isolate Lockout Test And Tag and any related equipment is functioning correctly
  • Hazard reporting procedures in place and added to the Electrical– Isolate Lockout Test And Tag SWMS
  • Incident reporting procedures in place and added to the Electrical– Isolate Lockout Test And Tag SWMS
  • Exclusion zones when conducting electrical – isolate lockout test and tag work
  • Risk Assessment for TASK completed and noted on the Electrical– Isolate Lockout Test And Tag SWMS
  • Electrical NO GO ZONES identified, discussed and documented. 

Assessment of Site Conditions 

Thoroughly assess the work site/area conditions when doing electrical - isolate lockout test and tag and ensure that:

  1. A risk assessment of the electrical – isolate lockout test and tag work is conducted
  2. Suitable access and adequate space to conduct electrical –isolate lockout test and tag work safely
  3. Consult with all stakeholders on potential hazards and risks when conducting electrical – isolate lockout test and tag work
  4. Consultation with all relevant workers and personnel for Electrical– Isolate Lockout Test And Tag SWMS details
  5. If conducting Electrical – Isolate Lockout Test And Tag at night, ensure there is adequate lighting
  6. Check that the work environment is suitable for electrical –isolate lockout test and tag work

Electrical – Isolate Lockout Test And Tag Training and Worker Qualifications

Ensure all workers have the appropriate licenses in conducting Electrical – Isolate Lockout Test And Tag as well as any qualifications that may be required for various electrical – isolate lockout test and tag projects before starting work. If White Cards are required, retain copies of all cards, licenses and qualifications of personnel.

All personnel must:

  1. Be trained and/or have received instructions on the Electrical – Isolate Lockout Test And Tag SWMS including all safety and emergency procedures.
  2. Be qualified, knowledgeable and competent in Electrical – Isolate Lockout Test And Tag operations and electrical – isolate lockout test and tag work as well as all delegated tasks/responsibilities
  3. Be fully aware and understand the scope of work in relation to the Electrical – Isolate Lockout Test And Tag SWMS

Below are some examples of some Control Measures to be implemented when creating your own Electrical – Isolate Lockout Test And Tag Safe Work Method Statement Template:

  • Before commencing work, do a Risk Assessment, review the Principal Contractor's Site Safety Plan, Emergency Procedures, and/or your subcontractors’ Safe Work Method Statements (SWMS);
  • Identify additional safety controls where required. Use a Risk Assessment Worksheet and Hazard Report Form;
  • Manage all risks to health and safety associated with falls from one level to another where they are reasonably likely to cause an injury;
  • Where required, obtain approvals from the supply authorities;
  • Make sure workers are trained, qualified, and or experienced to carry out the specified tasks; and
  • Before allowing work to commence, always request appropriate licences or certification when required, including local council approvals as necessary.
  • Make sure all workers including subcontractors have completed General Construction Induction Training and hold a current card or certification;
  • Advise workers and other persons on site regarding the work to be carried out.
  •  Always conduct a site specific induction for all project workers and have them sign a Site Induction Register including but not limited to:
  • Hazards specific to the site and work activities to be carried out;
  • Safety controls and revised Safe Work Method Statements (SWMS);
  • Use and maintenance of Personal Protective Equipment (PPE);
  • Emergency and evacuation procedures; and
  • Location of amenities and first aid facilities
  • Use PPE only when no other control can reduce or eliminate the hazard and/or risk;
  • Ensure all workers are issued with and wear the recommended PPE as required for safety on the worksite, specific to the activities, and tasks;
  • Train workers in the correct use, maintenance and storage of PPE; and
  • Before use, inspect all PPE making sure it is suitable for use.
  • Regularly carry out basic housekeeping, keeping access ways and the work area clear of materials, tools and debris;
  • Always wear appropriate footwear;
  • Ensure cables and other equipment do not cause a trip hazard; and
  • Barricade or restrict areas where the hazard cannot be eliminated.
  • Always check electrical test equipment is in good working order and suitable for the task.
  • Ensure all occupants / tenants are notified of potential power outages and protect against unauthorised access;
  • Locate and identify all energy sources necessary to be isolated;
  • Before de-energising, confirm and document phase rotation for commissioning (if required);
  • Ensure no work is carried out on live conductors;
  • Always wear gloves when handling sharp objects; and
  • Ensure work area remains clear and suitable lighting is available.
  • Ensure insulating barriers have been installed;
  • Ensure all power is turned off and rack out / remove all removable circuit breakers;
  • Ensure a safe distance of at least 500 mm is maintained when working near exposed conductors;
  • Ensure other power sources are isolated where accidental contact could occur whilst carrying out the work;
  • Ensure all auxiliary circuits are not live;
  • Always secure the isolation by locking out and danger tagging applicable circuit breakers;
  • Ensure a lockout hasp is used for multiple padlocks or remove, tie back and tag all connections;
  • Where safe and practicable, bond conductors with heavy duty clips and wire using approved methods; and
  • Regularly carry out basic housekeeping, keeping access ways and the work area clear of materials, tools and debris.
  • Apply danger tags to isolation devices and include any warning of any abnormal hazard on the tag;
  • Ensure danger tags are signed and dated;
  • Always train workers in the correct techniques for the task; and
  • Always train workers in the correct use of the equipment.
  • Ensure the test area has been safely isolated or de-energised by using appropriate testing equipment; and
  • After testing is done, ensure testing equipment is working correctly and make sure electrical conductors are dead.
  • Ensure any exposed conductors within 500 mm of workers or tools are identified, tested, and confirmed dead.
  • Where exposed conductors are energised, isolate them;
  • Ensure all energy sources have been isolated;
  • Make sure all testing equipment is suitable or better for normal 240/415 Volt work;
  • Ensure test equipment is in good working order prior to use; and
  • Locate potential earth conductors and touch only with insulated instrument probe.
  • Carry out all work in accordance with AS3000 Electrical installations;
  • Ensure you test every time before touching any circuits; and
  • Prior to leaving work area, ensure any incomplete work is fitted with out of service / danger tags and installation cannot be energised.
  • Refer to Specific Procedures for Energising and Commissioning Electrical Installations.
  • Ensure appropriate signs or labels are shown in the vicinity of work carried out to notify others of potential dangers;
  • Always train workers in the correct regulations for the task; and
  • Always train workers in the correct use of the equipment.
  • Always use proper manual handling techniques to remove any excess materials from the site;
  • Always wear gloves when handling sharp objects;
  • Preferably place equipment in approved storage area or back in work vehicle;
  • Ensure the work area is left clean and tidy; and
  • Always lock / secure storage areas and / or site as required.

National: View the Model Codes of Practice for Excavation Work on Safe Work Australia's website here.
Victoria: Victoria's Code of Practice for Excavation Work may be viewed on Work Safe Victoria's website here.