Nailing Tools (Gas Powered) Safe Work Method Statement

Nailing Tools (Gas Powered) Safe Work Method Statement (SWMS Template) delivered in Microsoft Word format for easy editing.

Nailing Tools (Gas Powered) Safe Work Method Statement

Nailing Tools (Gas Powered) Safe Work Method Statement (SWMS)

Whether you need to get on site to start work, looking to create a safe work environment or pitching for that next big contract or government tender - the Nailing Tools (Gas Powered) Safe Work Method Statement is easy to customise, easy to use and integrate into your current Safety Management System. If you don't have a Safety Management System, we need to talk, seriously, and you don't need to be carrying that level of risk exposure in your business - we can help.

Look, we understand that business should be rewarding and not consumed by tedious red tape. The Safe Work Method Statement Template we create is in an easy to understand format, while at the same time being some of the highest quality documents in the industry. Our SWMS documents get you onsite, save you loads of time and are very user-friendly. This way, you can get on with doing what you do best.

The Nailing Tools (Gas Powered) Safe Work Method Statement (SWMS) covers the following Job Steps, including potential hazards, control measures and risk ratings:

  1. Planning and preparation
  2. Training and capabilities
  3. Assess onsite conditions
  4. Set up work area
  5. Temporary Traffic Control (TMP)
  6. Delivery of materials and equipment
  7. General precautions
  8. Preparation
  9. Work area
  10. Operation
  11. On completion

The Nailing Tools (Gas Powered) Safe Work Method Statement, includes


Risk Assessment Matrix | Hierarchy of Controls | PPE | Emergency Response

Your Nailing Tools (Gas Powered) Safe Work Method Statement is ready to be used in three easy steps:

  1. Add your company logo and details to the SWMS Template.
  2. Identify site specific risks.
  3. Address any site specific risks and add them to your SWMS Template.

Your SWMS is now read to use, and may also be used as training materials for work related activities such as Workplace Inductions or WHS-OHS Toolbox Meeting Talks.

Bluesafe Quick Tips:

  1. Don't use rusty or corroded nails.
  2. Use the correct kind of compressed air for pneumatic nail guns.
  3. Make sure the tool is clean and properly loaded with the right kind of fastener.

Nailing Tools (Gas Powered) Safe Work Method Statement

  • Detailed and pre-filled Nailing Tools (Gas Powered) Safe Work Method Statement.
  • Immediate Download Delivery.
  • Fully editable Safe Work Method Statement Template.
  • Easy to use - no fuss customisation.
  • Referenced to Australian & NZ Standards (AS/NZS) & Legislation. 
Need to edit your
Nailing Tools (Gas Powered) Safe Work Method Statement
$ 96.80 AUD
$ 96.80 AUD
Buy now

5 SWMS Pack

$86.50 each
$ 432.50 AUD
$ 432.50 AUD
Buy now

10 SWMS Pack

$76.50 each
$ 765.00 AUD
$ 765.00 AUD
Buy now

20 SWMS Pack

$65.50ea
$ 1,310.00 AUD
$ 1,310.00 AUD
Buy now

50 SWMS Pack

$55.50 each
$ 2,275.00 AUD
$ 2,275.00 AUD
Buy now

View a Safe Work Method Statement Example

See an example of a Safe Work Method Statement Template below. All our SWMS Template documents are comprehensive in nature, easy to use, and are a huge time saver. Our Safe Work Method Statement Templates are quick and easy to customise to your specific business or operation and are perfectly suited for every day use, for larger contracts and tenders right through to qualifying for contractor management platforms such as CM3.

What is a Safe Work Method Statement?

A SWMS is a document that outlines the high-risk construction work activities that will be performed at a workplace, the hazards that will be present as a result of these activities, and the controls that will be implemented to mitigate the risks.

A single SWMS can be utilised for numerous high-risk construction work activities, such as employing powered mobile plant, working at heights of more than 2 metres, and working near to a road that is used by traffic other than pedestrians.

A SWMS is an administrative control that is used to support higher-order controls, such as engineering controls, that are designed to remove or reduce hazards to health and safety.

A SWMS differs from other documentation such as a Job Safety Analysis or a Safe Operating Procedure in that it focuses on specific jobs or processes. A SWMS isn't meant to be a procedure; rather, it's a tool for supervisors and workers to check and monitor the workplace control measures. For high-risk work activities, a PCBU (Person Conducting a Business or Undertaking)  must prepare a Safe Work Method Statement (SWMS) or check that one has been prepared before starting work. It is important to note that before any work process has started, a SWMS must be prepared.

A PCBU, on the other hand, also must manage health and safety hazards by eliminating or reducing them as much as possible. Before beginning any work on a project, the principal contractor must also obtain a copy of the SWMS.

What information does a Safe Work Method Statement need to contain?

A Safe Work Method Statement should identify high-risk work and any specify hazards related to high-risk construction work as well as any health and safety risks. The SWMS should describe the risk-control measures to be implemented, monitored, and reviewed and also should describe how the risk-control measures will be effective at reducing or eliminating the risk, and how they will be implemented, monitored, and reviewed.

A Safe Work Method Statement should be concise and focus on outlining the specific risks identified for the high-risk work to be performed, as well as the control measures to be implemented to ensure that the work is completed safely.

A long and overly complex Safe Work Method Statement which could be difficult to comprehend, implement and monitor or review may be confusing for workers to mentally digest and therefore is not ideal in helping to reduce or eliminate risks in the workplace. It is imperative that workers, and especially those who do not speak English, are able to understand the Safe Work Method Statement. Consider having pictures or diagrams added to the SWMS as a more effective way of presenting information contained within the SWMS.

The SWMS should also contain other regulatory requirements to protect health and safety of all personnel, such as controlling noise exposure and manual job risks. Also, keep in mind that evidence of a completed risk assessment may be required by the regulator or for auditing reasons if the Safe Work Method Statement is based on a workplace-specific risk assessment.

Who's Responsible for creating the Safe Work Method Statement?

In collaboration with workers who will be directly engaged in the activity, the person responsible for carrying out the work is usually best equipped to prepare the SWMS document. In most cases, this means that a Safe Work Method Statement is created by the builder for his or her employees, or by the subcontractor for their employees.

To establish who is in the best position to prepare the Safe Work Method Statement, the principle contractor, builder, and/or subcontractors should decide who will take responsibility for the SWMS.

It's also a requirement that all managers, contractors, supervisors, and workers be involved in the creation of a Safe Work Method Statement. Workers must be consulted so that they understand the SWMS in depth and what they must do to establish and maintain risks and implement control measures to manage the risk. Sharing information and utilising workers' knowledge and experience may also aid in ensuring that the task is completed in accordance with the SWMS.

If your workplace has a Health and Safety Representative, they should also be contacted while creating a Safe Work Method Statement.

What does the principal contractor's responsibility entail?

Before beginning work, a principal contractor must take all reasonable steps to obtain a SWMS from any contractor performing high-risk work. If no SWMS exists, the principal contractor must arrange for one to be created, for example by the contractor or subcontractor.

A general contractor should establish plans to ensure that high-risk work is carried out safely and in compliance with the Safe Work Method Statement. This can be done by keeping an eye on how the SWMS is being implemented on the ground.

The principal contractors' WHS management plan must also include detailed arrangements for collecting, assessing, monitoring, and reviewing the SWMS, according to the WHS Regulations.

How to Write a Safe Work Method Statement 

If you're looking to write your own Nailing Tools (Gas Powered) Safe Work Method Statement, the first step is to create the document as a Safe Work Method Statement Template. This way, you can use the same SWMSTemplate and then adjust the document for each different nailing tools (gas powered) project as needed, making sure that your Nailing Tools (Gas Powered) SWMS Template addresses any site specific risks.

The fastest and most cost effective solution would be to purchase a Bluesafe Nailing Tools (Gas Powered) SWMS Template. However, if you decide to take the route of writing your own nailing tools (gas powered) SWMS.

There are some fundamental requirements and information which you may want to consider adding to your Nailing Tools (Gas Powered) SWMS such as:

  • Details of the person(s) responsible for making sure implementation, monitoring and compliance of the Nailing Tools (Gas Powered) SWMS as well as any reviews and modifications.
  • Any information detailing safety meetings or toolbox talks in relation to nailing tools (gas powered) work, scheduled in accordance with legislative requirements to first identify any site hazards where the nailing tools (gas powered) work is being conducted, secondly, communicate the risks and hazards and then take steps to eliminate or control each hazard in relation to the nailing tools (gas powered) work being done.
  • Any changes added to the Nailing Tools (Gas Powered) SWMS after an incident or a near miss.

Note: The Nailing Tools (Gas Powered) SWMS must be kept and be available for inspection at least until the nailing tools (gas powered) work is completed. Where the Nailing Tools (Gas Powered) SWMS is revised, all versions of the SWMS Template should be kept. If a notifiable incident occurs in relation to the Nailing Tools (Gas Powered) Safe Work Method Statement, the Nailing Tools (Gas Powered) SWMS must be kept for a minimum of two years from the date of the incident.

Your Nailing Tools (Gas Powered) Safe Work Method Statement Template should list any high risk construction work, such as:

  • Does the nailing tools (gas powered) work outlined in the Nailing Tools (Gas Powered) SWMS involve a risk of a person falling more than 2 meters?
  • Is the nailing tools (gas powered) work outlined in the Nailing Tools (Gas Powered) SWMS carried out on or near pressurised gas mains or piping?
  • Is the nailing tools (gas powered) work outlined in the Nailing Tools (Gas Powered) SWMS carried out on a telecommunication tower?
  • Is the nailing tools (gas powered) work outlined in the Nailing Tools (Gas Powered) SWMS carried out on or near chemical, fuel or refrigerant lines?
  • Does the nailing tools (gas powered) work outlined in the Nailing Tools (Gas Powered) SWMS involve demolition of an element of a structure that is load-bearing?
  • Is the nailing tools (gas powered) work outlined in the Nailing Tools (Gas Powered) SWMS carried out on or near energised electrical installations or services?
  • Does the nailing tools (gas powered) work outlined in the Nailing Tools (Gas Powered) SWMS involve demolition of an element related to the physical integrity of a structure?
  • Is the nailing tools (gas powered) work outlined in the Nailing Tools (Gas Powered) SWMS carried out in an area that may have a contaminated or flammable atmosphere?
  • Does the nailing tools (gas powered) work outlined in the Nailing Tools (Gas Powered) SWMS involve, or is likely to involve, disturbing asbestos?
  • Does the nailing tools (gas powered) work outlined in the Nailing Tools (Gas Powered) SWMS involve tilt-up or precast concrete?
  • Does the nailing tools (gas powered) work outlined in the Nailing Tools (Gas Powered) SWMS involve structural alteration or repair that requires temporary support to prevent collapse?
  • Is the nailing tools (gas powered) work outlined in the Nailing Tools (Gas Powered) SWMS carried out on, in or adjacent to a road, railway, shipping lane or other traffic corridor?
  • Is the nailing tools (gas powered) work outlined in the Nailing Tools (Gas Powered) SWMS carried out in or near a confined space?
  • Is the nailing tools (gas powered) work outlined in the Nailing Tools (Gas Powered) SWMS carried out in an area of a workplace where there is any movement of powered mobile plant?
  • Is the nailing tools (gas powered) work outlined in the Nailing Tools (Gas Powered) SWMS carried out in/near a shaft or trench deeper than 1.5m or tunnel involving use of explosives?
  • Is the nailing tools (gas powered) work outlined in the Nailing Tools (Gas Powered) SWMS carried out in areas with artificial extremes of temperature?
  • Is the nailing tools (gas powered) work outlined in the Nailing Tools (Gas Powered) SWMS carried out in or near water or other liquid that involves a risk of drowning?
  • Does the nailing tools (gas powered) work outlined in the Nailing Tools (Gas Powered) SWMS involve diving work?

Your Nailing Tools (Gas Powered) Safe Work Method Statement should also identify any high-risk machinery or equipment in operation near the work site, such as:

Your Nailing Tools (Gas Powered) SWMS should also list any Personal Protective Equipment such as: 

  • Foot Protection - Boots or closed in shoes
  • Hand Protection - Gloves
  • Head Protection - Hard hat or helmet
  • Hearing Protection - Ear plugs or ear muffs
  • Eye Protection - Safety glasses, goggles or face shields
  • Respiratory Protection - Face masks etc
  • Face Protection - Face shield, welding mask etc
  • High Visual Clothing
  • Protective Clothing - Overalls etc
  • Fall Protection - Safety harness, edge protection etc
  • Sun Protection - Sunscreen, hat etc
  • Hair and Jewellery Secured - Hair Net, etc 

The Nailing Tools (Gas Powered) SWMS must be reviewed continually to ensure it remains effective and relevant. The Nailing Tools (Gas Powered) SWMS must be reviewed (and revised if necessary) if relevant control measures in relation to nailing tools (gas powered) work are revised. The review process should be carried out in consultation with workers (including contractors and subcontractors) who may be affected by the Nailing Tools (Gas Powered) and their health and safety representatives who represented that workgroup at the workplace.

When the Nailing Tools (Gas Powered) SWMS has been revised, the person conducting a business or undertaking must ensure:

  1. All persons involved in the nailing tools (gas powered)work are advised that a revision has been made and how they can access the revised Nailing Tools (Gas Powered) SWMS;
  2. Persons who will need to change a work procedure or system as a result of the review are advised of the changes in a way that will enable them to implement their duties consistently with the revised Nailing Tools (Gas Powered) SWMS; and,
  3. Workers that will be involved in the nailing tools (gas powered) work are provided with the relevant information and instruction that will assist them to understand and implement the revised Nailing Tools (Gas Powered) SWMS.

When preparing your Nailing Tools (Gas Powered) SWMS, here are some topics you might want to also include to ensure you have covered as many risks and hazards as possible.  

Planning and Preparation When Working With and Around Nailing Tools (Gas Powered).

When writing your Nailing Tools (Gas Powered) SWMS, establish any policies, procedures and systems for working with Nailing Tools (Gas Powered) in consultation with the Principal Contractor and workers while being sure to establish:

  • Health and Safety guidelines for nailing tools (gas powered) work
  • Emergency plans and evacuation procedures for the Nailing Tools (Gas Powered) SWMS
  • Worker inductions for Nailing Tools (Gas Powered)
  • Toolbox talks (safety meetings) added to the Nailing Tools (Gas Powered) SWMS
  • Outline details of supervision of the site and workers on the Nailing Tools (Gas Powered) SWMS
  • Check all workers qualifications, permits and competencies for Nailing Tools (Gas Powered) operations
  • Ensure the Nailing Tools (Gas Powered) and any related equipment is functioning correctly
  • Hazard reporting procedures in place and added to the Nailing Tools (Gas Powered) SWMS
  • Incident reporting procedures in place and added to the Nailing Tools (Gas Powered) SWMS
  • Exclusion zones when conducting nailing tools (gas powered) work
  • Risk Assessment for TASK completed and noted on the Nailing Tools (Gas Powered) SWMS
  • Electrical NO GO ZONES identified, discussed and documented.

Assessment of Site Conditions 

Thoroughly assess the work site/area conditions when working with gas powered nailing tools and ensure that:

  1. A risk assessment of the nailing tools (gas powered) work is conducted
  2. Suitable access and adequate space to conduct nailing tools (gas powered) work safely
  3. Consult with all stakeholders on potential hazards and risks when conducting nailing tools (gas powered) work
  4. Consultation with all relevant workers and personnel for Nailing Tools (Gas Powered) SWMS details
  5. If conducting Nailing Tools (Gas Powered) at night, ensure there is adequate lighting
  6. Check that the work environment is suitable for nailing tools (gas powered) work 

Nailing Tools (Gas Powered) Training and Worker Qualifications

Ensure all workers have the appropriate licenses in conducting Nailing Tools (Gas Powered) as well as any qualifications that maybe required for various nailing tools (gas powered) projects before starting work. If White Cards are required, retain copies of all cards, licenses and qualifications of personnel.

All personnel must:

  1. Be trained and/or have received instructions on the Nailing Tools (Gas Powered) SWMS including all safety and emergency procedures.
  2. Be qualified, knowledgeable and competent in Nailing Tools (Gas Powered) operations and nailing tools (gas powered) work as well as all delegated tasks/responsibilities
  3. Be fully aware and understand the scope of work in relation to the Nailing Tools (Gas Powered) SWMS

Below are some examples of some Control Measures to be implemented when creating your own Nailing Tools (Gas Powered) Safe Work Method Statement Template: 

  • Check the tool is in good working order and is not damaged.
  • Inspect the operation of all safeguards and controls before loading the fasteners.
  • Gas powered tools must be repaired only by authorised persons.
  • Always remove fuel cartridge and battery before working on tool.
  • During operation, tools will exhaust carbon monoxide into atmosphere.
  • Never use gas operated tools where flammable materials are present.
  • Nailer and fuel cartridges must always be kept out of reach of unauthorised persons.
  • Before storing a tool, always remove the fuel cartridge and battery.
  • Inspect the safety mechanism of the tool.
  • Unauthorised repairs must not be allowed.
  • Operate tools only in well-ventilated areas.
  • Never use the tool where the atmosphere is flammable.
  • Always keep the cartridges and tool in a cool place.
  • The fuel cartridge must be stored in its supplied case.
  • Make sure the fuel cartridge matches the make and model of the tool.
  • Before commencing work, make sure the battery has been fully charged.
  • Manufacturer approved fasteners must only be used for the tool.
  • Make sure the cover of the fuel cell is closed.
  • Always use a compatible charger only.
  • Incompatible fasteners must never be used.
  • Only those who are involved in nailing only should be allowed into the work area.
  • Work should be so arranged that other people are not in line of fire of the tool.
  • Make sure fired projectiles do not contact electrical wiring.
  • Unnecessary access to work area should be restricted.
  • A nailing too must never be pointed towards another person.
  • Do not assume a tool is empty.
  • Fasteners must never be driven into timber knots or over other fasteners.
  • A solid, sound backing must be ensured for driving fasteners.
  • Never depress or hold down the trigger if the nosepiece is not firmly pressed against the work piece to be fastened.
  • Before attempting to remove jammed fasteners, always make sure to remove the battery and fuel cartridges.
  • Keep proper balance and footing when operating and do not overreach.
  • When firing, tool and work may eject fasteners, dust, chips, etc.
  • Inside enclosed areas, hazardous noise levels may be present.
  • Never use such tools in rain or in the presence of excessive moisture.
  • Wearing Type 1 footwear in recommended.
  • Before operating the tool, inspect the area where fastener will be fired.
  • Unless ready to fire, keep the fingers away from the trigger.
  • Never place hands in the firing area.
  • Wearing eye protection is recommended.
  • Wearing hearing protection is recommended.

National: View the Model Codes of Practice for Excavation Work on Safe Work Australia's website here.
Victoria: Victoria's Code of Practice for Excavation Work may be viewed on Work Safe Victoria's website here.