Repair Or Replace Sanitary Plumbing Stackwork Safe Work Method Statement

Relocate Sewer Safe Work Method Statement (SWMS Template) delivered in Microsoft Word format for easy editing.

Repair Or Replace Sanitary Plumbing Stackwork Safe Work Method Statement

Repair Or Replace Sanitary Plumbing Stackwork Safe Work Method Statement (SWMS)

Whether you need to start work on site, looking to make your workplace safer or going for a Local Council Tender, the Repair Or Replace Sanitary Plumbing Stackwork (Sandblasting) Safe Work Method Statement is completely comprehensive, easy to use and easy to implement into your business.

Look, we understand business can be hard enough as it is without all the red tape, often written in language only a martian would understand. That's why every Safe Work Method Statement Template is written in an easy to understand format, while at the same time being some of the highest quality in the industry. Our SWMS documents get you on site, save you loads of time and are easy to use. This way, you can get on with doing what you do best.


The Repair Or Replace Sanitary Plumbing Stackwork Safe Work Method Statement (SWMS) covers the following Job Steps, including potential hazards, control measures and risk ratings:

  1. Planning and preparation
  2. Training and capabilities
  3. Assess onsite conditions
  4. Set up work area
  5. Temporary Traffic Control (TMP)
  6. Delivery of materials and equipment
  7. Access and isolate the work area
  8. Receiving material deliveries
  9. Moving materials, tools and equipment
  10. Locate and identify existing services in the work area
  11. Installation of pipework
  12. Environmental Waste Management Consideration
  13. Clean up and restore area
  14. On completion

The Repair Or Replace Sanitary Plumbing Stackwork Safe Work Method Statement Includes


Risk Assessment Matrix | Hierarchy of Controls | PPE | Emergency Response

Your Repair Or Replace Sanitary Plumbing Stackwork Safe Work Method Statement is ready to be used in three easy steps:

  1. Add your company logo and details to the SWMS Template.
  2. Identify site specific risks.
  3. Address any site specific risks and add them to your SWMS Template.

Now that your Safe Work Method Statement (SWMS) is ready for use, you can also make the SWMS document available as a training resource for activities such as WHS-OHS Toolbox Meeting Talks or Workplace Inductions.

Repair Or Replace Sanitary Plumbing Stackwork Safe Work Method Statement

  • Detailed and pre-filled Repair Or Replace Sanitary Plumbing Stackwork Safe Work Method Statement.
  • Immediate Download Delivery.
  • Fully editable Safe Work Method Statement Template.
  • Easy to customise - instructions included.
  • Referenced to AS/NZS (Standards) and Legislation. 
Need to edit your
Repair Or Replace Sanitary Plumbing Stackwork Safe Work Method Statement
$ 96.80 AUD
$ 96.80 AUD
Buy now

5 SWMS Pack

$86.50 each
$ 432.50 AUD
$ 432.50 AUD
Buy now

10 SWMS Pack

$76.50 each
$ 765.00 AUD
$ 765.00 AUD
Buy now

20 SWMS Pack

$65.50ea
$ 1,310.00 AUD
$ 1,310.00 AUD
Buy now

50 SWMS Pack

$55.50 each
$ 2,275.00 AUD
$ 2,275.00 AUD
Buy now

View a Safe Work Method Statement Example

See an example of a Safe Work Method Statement Template below. All our SWMS Template documents are comprehensive in nature, easy to use, and are a huge time saver. Our Safe Work Method Statement Templates are quick and easy to customise to your specific business or operation and are perfectly suited for every day use, for larger contracts and tenders right through to qualifying for contractor management platforms such as CM3.

What is a Safe Work Method Statement?

A SWMS is a document that outlines the high-risk construction work activities that will be performed at a workplace, the hazards that will be present as a result of these activities, and the controls that will be implemented to mitigate the risks.

A single SWMS can be utilised for numerous high-risk construction work activities, such as employing powered mobile plant, working at heights of more than 2 metres, and working near to a road that is used by traffic other than pedestrians.

A SWMS is an administrative control that is used to support higher-order controls, such as engineering controls, that are designed to remove or reduce hazards to health and safety.

A SWMS differs from other documentation such as a Job Safety Analysis or a Safe Operating Procedure in that it focuses on specific jobs or processes. A SWMS isn't meant to be a procedure; rather, it's a tool for supervisors and workers to check and monitor the workplace control measures. For high-risk work activities, a PCBU (Person Conducting a Business or Undertaking)  must prepare a Safe Work Method Statement (SWMS) or check that one has been prepared before starting work. It is important to note that before any work process has started, a SWMS must be prepared.

A PCBU, on the other hand, also must manage health and safety hazards by eliminating or reducing them as much as possible. Before beginning any work on a project, the principal contractor must also obtain a copy of the SWMS.

What information does a Safe Work Method Statement need to contain?

A Safe Work Method Statement should identify high-risk work and any specify hazards related to high-risk construction work as well as any health and safety risks. The SWMS should describe the risk-control measures to be implemented, monitored, and reviewed and also should describe how the risk-control measures will be effective at reducing or eliminating the risk, and how they will be implemented, monitored, and reviewed.

A Safe Work Method Statement should be concise and focus on outlining the specific risks identified for the high-risk work to be performed, as well as the control measures to be implemented to ensure that the work is completed safely.

A long and overly complex Safe Work Method Statement which could be difficult to comprehend, implement and monitor or review may be confusing for workers to mentally digest and therefore is not ideal in helping to reduce or eliminate risks in the workplace. It is imperative that workers, and especially those who do not speak English, are able to understand the Safe Work Method Statement. Consider having pictures or diagrams added to the SWMS as a more effective way of presenting information contained within the SWMS.

The SWMS should also contain other regulatory requirements to protect health and safety of all personnel, such as controlling noise exposure and manual job risks. Also, keep in mind that evidence of a completed risk assessment may be required by the regulator or for auditing reasons if the Safe Work Method Statement is based on a workplace-specific risk assessment.

Who's Responsible for creating the Safe Work Method Statement?

In collaboration with workers who will be directly engaged in the activity, the person responsible for carrying out the work is usually best equipped to prepare the SWMS document. In most cases, this means that a Safe Work Method Statement is created by the builder for his or her employees, or by the subcontractor for their employees.

To establish who is in the best position to prepare the Safe Work Method Statement, the principle contractor, builder, and/or subcontractors should decide who will take responsibility for the SWMS.

It's also a requirement that all managers, contractors, supervisors, and workers be involved in the creation of a Safe Work Method Statement. Workers must be consulted so that they understand the SWMS in depth and what they must do to establish and maintain risks and implement control measures to manage the risk. Sharing information and utilising workers' knowledge and experience may also aid in ensuring that the task is completed in accordance with the SWMS.

If your workplace has a Health and Safety Representative, they should also be contacted while creating a Safe Work Method Statement.

What does the principal contractor's responsibility entail?

Before beginning work, a principal contractor must take all reasonable steps to obtain a SWMS from any contractor performing high-risk work. If no SWMS exists, the principal contractor must arrange for one to be created, for example by the contractor or subcontractor.

A general contractor should establish plans to ensure that high-risk work is carried out safely and in compliance with the Safe Work Method Statement. This can be done by keeping an eye on how the SWMS is being implemented on the ground.

The principal contractors' WHS management plan must also include detailed arrangements for collecting, assessing, monitoring, and reviewing the SWMS, according to the WHS Regulations.

How to Write a Safe Work Method Statement 

If you're looking to write your own Repair Or Replace Sanitary Plumbing Stackwork Safe Work Method Statement, the first step is to create the document as a Safe Work Method Statement Template. This way, you can use the same SWMS Template and then adjust the document for each different repair or replace sanitary plumbing stackwork project as needed, making sure that your Repair Or Replace Sanitary Plumbing Stackwork SWMS Template addresses any site specific risks.

The fastest and most cost effective solution would be to purchase a Bluesafe Repair Or Replace Sanitary Plumbing Stackwork SWMS Template. However, if you decide to take the route of writing your own repair or replace sanitary plumbing stackwork SWMS.

There are some fundamental requirements and information which you may want to consider adding to your Repair Or Replace Sanitary Plumbing Stackwork SWMS such as:

  • Details of the person(s) responsible for making sure implementation, monitoring and compliance of the Repair Or Replace Sanitary Plumbing Stackwork SWMS as well as any reviews and modifications.
  • Any information detailing safety meetings or toolbox talks in relation to repair or replace sanitary plumbing stackwork work, scheduled in accordance with legislative requirements to first identify any site hazards where the repair or replace sanitary plumbing stackwork work is being conducted, secondly, communicate the risks and hazards and then take steps to eliminate or control each hazard in relation to the repair or replace sanitary plumbing stackwork work being done.
  • Any changes added to the Repair Or Replace Sanitary Plumbing Stackwork SWMS after an incident or a near miss.

Note: The Repair Or Replace Sanitary Plumbing Stackwork SWMS must be kept and be available for inspection at least until the repair or replace sanitary plumbing stackwork work is completed. Where the Repair Or Replace Sanitary Plumbing Stackwork SWMS is revised, all versions of the SWMS Template should be kept. If a notifiable incident occurs in relation to the RepairOr Replace Sanitary Plumbing Stackwork Safe Work Method Statement, the Repair Or Replace Sanitary Plumbing Stackwork SWMS must be kept for a minimum of two years from the date of the incident.

Your Repair Or Replace Sanitary Plumbing Stackwork Safe Work Method Statement Template should list any high risk construction work, such as: 

  • Does the repair or replace sanitary plumbing stackwork work outlined in the Repair Or Replace Sanitary Plumbing Stackwork SWMS involve a risk of a person falling more than 2 meters?
  • Is the repair or replace sanitary plumbing stackwork work outlined in the Repair Or Replace Sanitary Plumbing Stackwork SWMS carried out on or near pressurised gas mains or piping?
  • Is the repair or replace sanitary plumbing stackwork work outlined in the Repair Or Replace Sanitary Plumbing Stackwork SWMS carried out on a telecommunication tower?
  • Is the repair or replace sanitary plumbing stackwork work outlined in the Repair Or Replace Sanitary Plumbing Stackwork SWMS carried out on or near chemical, fuel or refrigerant lines?
  • Does the repair or replace sanitary plumbing stackwork work outlined in the Repair Or Replace Sanitary Plumbing Stackwork SWMS involve demolition of an element of a structure that is load-bearing?
  • Is the repair or replace sanitary plumbing stackwork work outlined in the Repair Or Replace Sanitary Plumbing Stackwork SWMS carried out on or near energised electrical installations or services?
  • Does the repair or replace sanitary plumbing stackwork work outlined in the Repair Or Replace Sanitary Plumbing Stackwork SWMS involve demolition of an element related to the physical integrity of a structure?
  • Is the repair or replace sanitary plumbing stackwork work outlined in the Repair Or Replace Sanitary Plumbing Stackwork SWMS carried out in an area that may have a contaminated or flammable atmosphere?
  • Does the repair or replace sanitary plumbing stackwork work outlined in the Repair Or Replace Sanitary Plumbing Stackwork SWMS involve, or is likely to involve, disturbing asbestos?
  • Does the repair or replace sanitary plumbing stackwork work outlined in the Repair Or Replace Sanitary Plumbing Stackwork SWMS involve tilt-up or precast concrete?
  • Does the repair or replace sanitary plumbing stackwork work outlined in the Repair Or Replace Sanitary Plumbing Stackwork SWMS involve structural alteration or repair that requires temporary support to prevent collapse?
  • Is the repair or replace sanitary plumbing stackwork work outlined in the Repair Or Replace Sanitary Plumbing Stackwork SWMS carried out on, in or adjacent to a road, railway, shipping lane or other traffic corridor?
  • Is the repair or replace sanitary plumbing stackwork work outlined in the Repair Or Replace Sanitary Plumbing Stackwork SWMS carried out in or near a confined space?
  • Is the repair or replace sanitary plumbing stackwork work outlined in the Repair Or Replace Sanitary Plumbing Stackwork SWMS carried out in an area of a workplace where there is any movement of powered mobile plant?
  • Is the repair or replace sanitary plumbing stackwork work outlined in the Repair Or Replace Sanitary Plumbing Stackwork SWMS carried out in/near a shaft or trench deeper than 1.5m or tunnel involving use of explosives?
  • Is the repair or replace sanitary plumbing stackwork work outlined in the Repair Or Replace Sanitary Plumbing Stackwork SWMS carried out in areas with artificial extremes of temperature?
  • Is the repair or replace sanitary plumbing stackwork work outlined in the Repair Or Replace Sanitary Plumbing Stackwork SWMS carried out in or near water or other liquid that involves a risk of drowning?
  • Does the repair or replace sanitary plumbing stackwork work outlined in the Repair Or Replace Sanitary Plumbing Stackwork SWMS involve diving work?

Your Repair Or Replace Sanitary Plumbing Stackwork Safe Work Method Statement should also identify any high-risk machinery or equipment in operation near the work site, such as:

Your Repair Or Replace Sanitary Plumbing Stackwork SWMS should also list any Personal Protective Equipment such as:

  • Foot Protection - Boots or closed in shoes
  • Hand Protection - Gloves
  • Head Protection - Hard hat or helmet
  • Hearing Protection - Ear plugs or ear muffs
  • Eye Protection - Safety glasses, goggles or face shields
  • Respiratory Protection - Face masks etc
  • Face Protection - Face shield, welding mask etc
  • High Visual Clothing
  • Protective Clothing - Overalls etc
  • Fall Protection - Safety harness, edge protection etc
  • Sun Protection - Sunscreen, hat etc
  • Hair and Jewellery Secured - Hair Net, etc 

The Repair Or Replace Sanitary Plumbing Stackwork SWMS must be reviewed continually to ensure it remains effective and relevant. The Repair Or Replace Sanitary Plumbing Stackwork SWMS must be reviewed (and revised if necessary) if relevant control measures in relation to repair or replace sanitary plumbing stackwork work are revised. The review process should be carried out in consultation with workers (including contractors and subcontractors) who may be affected by the Repair Or Replace Sanitary Plumbing Stackwork and their health and safety representatives who represented that workgroup at the workplace. 

When the Repair Or Replace Sanitary Plumbing Stackwork SWMS has been revised, the person conducting a business or undertaking must ensure:  

  1. All persons involved in the repair or replace sanitary plumbing stackwork work are advised that a revision has been made and how they can access the revised Repair Or Replace Sanitary Plumbing Stackwork SWMS;
  2. Persons who will need to change a work procedure or system as a result of the review are advised of the changes in a way that will enable them to implement their duties consistently with the revised Repair OrReplace Sanitary Plumbing Stackwork SWMS; and,
  3. Workers that will be involved in the repair or replace sanitary plumbing stackwork work are provided with the relevant information and instruction that will assist them to understand and implement the revised Repair Or Replace Sanitary Plumbing Stackwork SWMS.

When preparing your Repair Or Replace Sanitary Plumbing Stackwork SWMS, here are some topics you might want to also include to ensure you have covered as many risks and hazards as possible.

Planning and Preparation When Working With and Around Repair Or Replace Sanitary Plumbing Stackwork.

When writing your Repair Or Replace Sanitary Plumbing Stackwork SWMS, establish any policies, procedures and systems for working withRepair Or Replace Sanitary Plumbing Stackwork in consultation with the Principal Contractor and workers while being sure to establish:

  • Health and Safety guidelines for repair or replace sanitary plumbing stackwork work
  • Emergency plans and evacuation procedures for the Repair Or Replace Sanitary Plumbing Stackwork SWMS
  • Worker inductions for Repair Or Replace Sanitary Plumbing Stackwork
  • Toolbox talks (safety meetings) added to the Repair OrReplace Sanitary Plumbing Stackwork SWMS
  • Outline details of supervision of the site and workers on the Repair Or Replace Sanitary Plumbing Stackwork SWMS
  • Check all workers qualifications, permits and competencies for Repair Or Replace Sanitary Plumbing Stackwork operations
  • Ensure the Repair Or Replace Sanitary Plumbing Stackwork and any related equipment is functioning correctly
  • Hazard reporting procedures in place and added to the Repair Or Replace Sanitary Plumbing Stackwork SWMS
  • Incident reporting procedures in place and added to the Repair Or Replace Sanitary Plumbing Stackwork SWMS
  • Exclusion zones when conducting repair or replace sanitary plumbing stackwork work
  • Risk Assessment for TASK completed and noted on the Repair Or Replace Sanitary Plumbing Stackwork SWMS
  • Electrical NO GO ZONES identified, discussed and documented.

Assessment of Site Conditions

Thoroughly assess the work site/area conditions when doing sanitary plumbing stackwork and ensure that:

  1. A risk assessment of the repair or replace sanitary plumbing stackwork work is conducted
  2. Suitable access and adequate space to conduct repair or replace sanitary plumbing stackwork work safely
  3. Consult with all stakeholders on potential hazards and risks when conducting repair or replace sanitary plumbing stackwork work
  4. Consultation with all relevant workers and personnel for Repair Or Replace Sanitary Plumbing Stackwork SWMS details
  5. If conducting Repair Or Replace Sanitary Plumbing Stackwork at night, ensure there is adequate lighting
  6. Check that the work environment is suitable for repair or replace sanitary plumbing stackwork work

Repair Or Replace Sanitary Plumbing Stackwork Training and Worker Qualification 

Ensure all workers have the appropriate licenses in conducting Repair Or Replace Sanitary Plumbing Stackwork as well as any qualifications that may be required for various repair or replace sanitary plumbing stackwork projects before starting work. If White Cards are required, retain copies of all cards, licenses and qualifications of personnel.

All personnel must: 

  1. Be trained and/or have received instructions on the Repair Or Replace Sanitary Plumbing Stackwork SWMS including all safety and emergency procedures.
  2. Be qualified, knowledgeable and competent in Repair Or Replace Sanitary Plumbing Stackwork operations and repair or replace sanitary plumbing stackwork work as well as all delegated tasks/responsibilities
  3. Be fully aware and understand the scope of work in relation to the Repair Or Replace Sanitary Plumbing Stackwork SWMS 

Below are some examples of some Control Measures to be implemented when creating your own Repair Or Replace Sanitary Plumbing Stackwork Safe Work Method Statement Template:

  • All personnel involved must be inducted.
  • All personnel are trained and qualified to carry out the task
  • Appropriate contract specific inductions have been undertaken
  • First aid kit present suitable for the site
  • Check the Asbestos Register (if applicable)
  • Minimum of two competent personnel tp be present when working at heights 
  • Complete job start with consulting all workers 
  • Complete plant pre start checklist (if applicable) 
  • Develop working at heights rescue plan (if applicable) 
  • Advise Client prior to commencing work, on arrival sign maintenance logbook.
  • Arrange to access work area via Client or their representative.
  • Liaise with Client as to the safest means for vehicles to enter the Client grounds not at peak movement times,
  • Site person to walk/direct all vehicles through site
  • Clearly define work area and secure area using doors in area or provide barricades & signs
  • Ensure correct PPE is worn as identified on SWMS and JOBSTART.
  • Secure all tools and equipment at all times when not in use.
  • Site person to walk/direct all vehicles through work site.
  • Establish exclusion zone with appropriate barricades and signage
  • When relocating and or removing heavy or awkward obstacles use   mechanical aids when available, team lifting for awkward loads,
  • Before starting ensure any existing electrical wiring, which may be in   the way, is turned off and, where practicable, relocated
  • Where the work is at high level a suitable scaffold is to set up with    adequate access, hand / mid rails and toe boards in place. The    scaffold must be erected in accordance with AS / NZS
  • Traffic / pedestrian control is to be in place whenever vehicles enter and leave the work area
  • When unloading and moving materials, tools and equipment use   mechanical aids when available, team lifting for awkward loads.
  • Wear appropriate PPE, gloves, as required
  • A thorough visual inspection of the work area is to be carried out and all existing services are to be identified. Any services which may be affecting the installation of the new work are to be turned off by suitably qualified tradesmen and if practicable, relocated
  • When moving materials, tools and equipment use mechanical aids   when available, team lifting for awkward loads,
  • Ensure access to and from the work area is free from obstacles. Store materials etc to the side of access ways
  • Wear appropriate PPE, gloves, as required
  • Before using hazardous substances, current SDS are to be reviewed and personnel are to be trained in the use, storage and care of these hazardous substances. Recommended PPE is to be worn at all times
  • Ensure there is adequate ventilation
  • Ensure all contaminated waste is removed in appropriately sealed receptacles (where applicable) Ensure all construction or demolition waste is removed from site and recycled or disposed of at an EPA approved facility- Waste Disposal Dockets to be kept on file.
  • Where applicable ensure all contaminated waste is removed in   appropriately sealed receptacles
  • When reinstating infrastructure use mechanical aids   when available, team lifting for awkward loads, Avoid long periods of repetitive movements and vary heavy lifting tasks.
  • Ensure all reinstated areas and surfaces are free from subsidence   etc and are at least equal to pre-work condition  
  • Remove barricades and signs.
  • Liaise with client as to the safest means for vehicles to leave the site not at peak movement times,
  • Site person to walk/direct all vehicles through the site
  • Sign off and notify client that site is being vacated

National: View the Model Codes of Practice for Excavation Work on Safe Work Australia's website here.
Victoria: Victoria's Code of Practice for Excavation Work may be viewed on Work Safe Victoria's website here.